HANDLE, RIGHT & LEFT END SEGMENT, MAKE: VARCO/BJ
2015-07-27 07:10 Click：times
| Description | Quantity | Unit |
| OILFIELD EQUIPMENT- GATE CLAMP CYLINDER MACH PH100 VARCO | 1 | NOS |
| Element, Varco, 82749,filter,tds(parker 932633Q) - USA | 1 | NOS |
| OILWELL rig123.net' target='_blank'>DRILLING rig123.net' target='_blank'>RIG SPARES : CLIP WIRE ROPE .375 IN PH100 VARCO (P/N 30125629) | 4 | PCS |
| OILWELL DRILLING RIG SPARES : SEAL PISTON VARCO (P/N 72219) | 2 | PCS |
| OILWELL DRILLING RIG SPARES : SEAL ROD VARCO (P/N 72220) | 1 | PCS |
| OILWELL DRILLING RIG SPARES : WIPER ROD VARCO (P/N 72221) | 1 | PCS |
| OILWELL DRILLING RIG SPARES : VALVE DIRECTIONAL CONTROL PLS5/MHH VARCO (P/N 110538-R4) | 1 | PCS |
| OILWELL DRILLING RIG SPARES : CYLINDER LIFT HYDRAULIC PH100 VARCO (P/N 125799) | 1 | PCS |
| OILWELL DRILLING RIG SPARES : CYLINDER VARCO FOR 5.0 IN COUNTER BALANCE (P/N 94764) | 1 | PCS |
| OILWELL DRILLING RIG SPARES : CABLE LIFT ASSEMBLY PH100 VARCO (P/N 30125583) | 1 | PCS |
| OILWELL DRILLING RIG SPARES : CARTIDGE VALVE COUNTER BALANCE VARCO (P/N 109655-10) | 1 | PCS |
| OILWELL DRILLING RIG SPARES : CARTIDGE VALVE COUNTER BALANCE VARCO (P/N 109655-13) | 1 | PCS |
| OILWELL DRILLING RIG SPARES :CRANK ASSEMBLY EXTERNAL VARCO (P/N 30173893) | 2 | PCS |
| OILWELL DRILLING RIG SPARES : VALVE TDS9S CART FLOW CTL VARCO (P/N 109302-130NC) | 1 | PCS |
| OILWELL DRILLING RIG SPARES : REPAIR KIT COMPLETE VARCO (P/N 30177549-2) | 1 | NOS |
| Fitting,Varco,103431212,hose,3/4 in JIC 37 deg male - USA | 6 | NOS |
| FILTER, OIL, KIT, FOR GEAR OIL, CONSISTING OF 60 MICRON FILTER AND O-RING, FOR USE WITH TOP DRIVE LUBE OIL SYSTEM, VARCO | 2 | NOS |
| OILFIELD EQUIPMENT-VARCO BJ CARTRIDGE (94518-23HN) | 4 | NOS |
| OILFIELD EQUIPMENT-VARCO BJ O RING (51300-240-B) | 2 | NOS |
| OILFIELD EQUIPMENT-VARCO BJ REDUCER, INT. 37?/37? (56517-6-4-S) | 1 | NOS |
| HOUSING, FABRICATION, FOR THULE SHALE SHAKERS MODEL # VSM300, SERIAL # 300198, BRANDT/VARCO P/N 300/01/002 (OILWELL EQUI | 1 | NOS |
| ASSEMBLY,HOSE,FOR VARCO MODLE ST-80 IRON ROUGHNECK,VARCO P/N 59547P29X040(OILWELL EQUIPMENT) | 1 | NOS |
| OIL WELL SUPPLIES : PART NO: 51300-446-B, O-RING, SEALING,FOR VARCO TOPDRIVE TDS-4 APPLICATION (QTY: 2 NOS) | 0.26 | KGS |
| OILWELL EQUIPMENT NUT,ROD TIE FOR LIFT CYLINDER,SSW-40 SPINNING WRENCH,VARCO P/N 75341-2.C.O.NETHERLANDS | 16 | NOS |
| OIL WELL SPARES. ASSEMBLY, LINK TILT, FOR TDS 4S, 650 TONS,VARCO P/N 74587-5(SERIAL NUMBER TSD4SK26R212) | 1 | PCS |
| KEY 1.250 VARCO (P/N 30151225-10) (OILWELL EQUIPMENT) | 6 | NOS |
| PACKING KIT WASHPIPE 4 STD VARCO (P/N 30123440-PK)(OILWELL EQUIPMENT) | 1 | NOS |
| BREATHER VARCO (P/N 30172438-101)(OILWELL EQUIPMENT) | 2 | NOS |
| ABSOLUTE ENDCODER SEE TEXT VARCO (P/N 30155842-040-HE)(OILWELL EQUIPMENT) | 1 | NOS |
| TENSION ASSEMBLY ARM BELT VARCO 30176887(OILWELL EQUIPMENT) | 1 | NOS |
| SHEAVE 30T ALUMINUM AHS-10Q VARCO (P/N 301765572) (OILWELL EQUIPMENT) | 1 | NOS |
| DIE-PIPE,VARCO,81788,F/TDS TORQUE WRENCH PIPE HANDLER AN IRON ROUGHNECK - USA | 8 | PCS |
| FOR VARCO,TDS,MODEL 11 SA,UPPER IBOP,PH50 ASSY,6-5/8 X 6-5/8,C/W CERT (OILFIELD EQUIPMENTS FOR TDS PARTS) (1 NOS) | 72.5 | KGS |
| VARCO 2-7/8" - 4-1/8" MP-S Safety | 1 | NOS |
| USED OILWELL EQUIPMENT - B TYPE VARCO HAND SLIPS W/14 SEGMENTS | 1 | NOS |
| USED OILWELL EQUIPMENT - 10-3/4" SIDE DOOR ELEVATOR VARCO BJ TYPE SLX -150 TON | 1 | NOS |
| USED OILWELL EQUIPMENT - 8" DRILL COLLAR SAFETY CLAMP W/10 SEGMENT VARCO TYPE | 1 | NOS |
| USED OILWELL EQUIPMENT - 8" DRILL COLLAR SAFETY CLAMP W/10 SEGMENT VARCO TYPE | 1 | NOS |
| 2 NUM KIT, DIE HOLDER FOR ST80-H VARCO SPIN TO | 11.329 | KGS |
| WASHER, FLAT, 3/4", CADMIUM PLATED STEEL, VARCO SHAFFER P/N 8020408 | 6 | NOS |
| IDLER, AR3200 SHAFT ASSY, VARCO P/N - 87774 | 1 | NOS |
| OILWELL DRILLING RIG SPARES : BEARING ANGULAR CONTACT VARCO (P/N 30153388) | 1 | PCS |
| LOCKWASHER, TAB, 0.40, VARCO P/N 87052 | 4 | NOS |
| GREASE, WATERPROOF, 35LB PER PAIL, VARCO P/N 212410(MADE OF GREASE)(2 PAIL) | 31.75 | KGS |
| OILFIELD EQUIPMENT PLUG, (PSDS) DWG NO 92659 FOR VARCO 500 TON PIPE HANDLER | 2 | NOS |
| OILFIELD EQUIPMENT KIT, REPAIR FOR VARCO TOP DRIVE LIFT CYL | 1 | NOS |
| OILFIELD EQUIPMENT CAP, DUST, AIR FILTER, FOR IBOP ACTUATOR ARMS, VARCO P/N 55915-6 | 2 | NOS |
| PIN, COTTER 3/16" X 2" STL SAE J487 ZINC PLATED FOR CASING SLIPS, VARCO | 600 | NOS |
| SLIP ASSEMBLY 3-1/2 YC-ELEV W/CERT VARCO 34931Y (OILWELL EQUIPMENT) | 1 | NOS |
| GUIDES PLATES YC 3-1/2 VARCO 26827-1 (OILWELL EQUIPMENT) | 1 | NOS |
| OILWELL DRILLING RIG SPARES : 56519-6-6-S Varco BJ Elbow, O-Ring Boss | 2 | PCS |
| OILFIELD EQUIPMENT KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: | 10 | NOS |
| OIL WELL SPARES. BUTTON, CIRCULAR, 20" (SET/312), VARCO BJP/N 2631-312 (01 PC) | 28 | KGS |
| OILFIELD EQUIPMENT FILTER, TDS, VARCO P/N 75937 | 2 | NOS |
| LATCH, ASSEMBLY FINGER, VARCO P/N 123723-1 | 1 | NOS |
| EXCHANGER, HEAT, VARCO P/N 109411 | 1 | NOS |
| OILFIELD EQUIPMENT- SHAFT COMPOUND GEAR PH-100 VARCO | 1 | NOS |
| OILFIELD EQUIPMENT- GEAR BULL TDS-8S VARCO | 1 | NOS |
| OIL WELL SPARES. KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ | 31 | KGS |
| 3 NUM KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE LOWER DOVETAIL 5-EA 50108-14- | 7.96 | KGS |
| 2 NUM BUSHING, WEAR FOR VARCO ELEVATOR HGG 200062Y | 2 | KGS |
| OIL WELL SUPPLIES: 56519-8-6-S VARCO BJ ELBOW O RING BOSS 37 (QTY: 1 NOS) | 0.14 | KGS |
| OIL WELL SUPPLIES: 56519-6-6-S VARCO BJ ELBOW O-RING BOSS (QTY: 3 NOS) | 0.162 | KGS |
| OIL WELL SUPPLIES: 56519-6-6-S VARCO BJ ELBOW O-RING BOSS (QTY: 2 NOS) | 0.108 | KGS |
| OIL WELL SUPPLIES: 94518-23HN VARCO BJ CARTRIDGE (QTY: 4 NOS) | 1.17818 | KGS |
| OIL WELL SUPPLIES: 56529-6-6S VARCO BJ CONNECTOR O-RING BOSS 37' (QTY: 5 NOS) | 0.001135 | KGS |
| OIL WELL SUPPLIES: 56519-8-6-S VARCO BJ ELBOW O-RING BOSS 37' (QTY: 1 NOS) | 0.14 | KGS |
| OIL WELL SUPPLIES: 56547-16-S VARCO BJ LOCK NUT BULCK HEAD (QTY: 1 NOS) | 0.5 | KGS |
| OIL WELL SUPPLIES: 93547-2B75N VARCO BJ PILOT TO OPEN CHECK VALVE (QTY: 2 NOS) | 0.681818 | KGS |
| OIL WELL SUPPLIES: 56517-6-4-S VARCO BJ REDUCER INT 37'/37' (QTY: 1 NOS) | 0.018182 | KGS |
| OIL WELL SUPPLIES: 5651-6-6-S VARCO BJ ELBOW O-RING BOSS (QTY: 18 NOS) | 0.972 | KGS |
| OIL WELL SUPPLIES: 56547-16-S VARCO BJ LOCK NUT BULCK HEAD (QTY: 3 NOS) | 1.5 | KGS |
| OIL WELL SUPPLIES: 94817-3AN VARCO PRESSURE REDUCING CATRIDGE (QTY: 1 NOS) | 0.709091 | KGS |
| OIL WELL SUPPLIES: 56529-6-6-S VARCO BJ CONNECTOR O-RING BOSS 37" (QTY: 1 NOS) | 0.000227 | KGS |
| VARCO INSERT FOR BOWL NO.1 FOR 13-3/8" AND 11-3/4" CASING MPCH MASTER BUSHING : SPEC NO.OE51101-39 | 7 | NOS |
| VARCO INSERT FOR BOWL NO.2 : SPEC NO.OE51101-38 | 7 | NOS |
| NUT, LOCK, COMMERCIAL THIN TYPE, VARCO BJ P/N 944422-6 | 32 | NOS |
| OILFIELD EQUIPMENT KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER DOVETAIL, 5 E | 3 | NOS |
| KIT, SEAL, SPARE PART 18-10M SBOP, VARCO P/N 157615+20 | 1 | NOS |
| DVC, 3 POSITION 35 GPM UL WITH CK, VARCO | 1 | NOS |
| PIN, RETAINING, VARCO | 4 | NOS |
| PIN, RETAINING, VARCO | 2 | NOS |
| KIT, REPAIR, VALVE, FOR RISER TENSIONER, VARCO SHAFFER | 15 | NOS |
| MASTER BUSHING, REBUILT OEM VARCO MPCH, NO.3 BOV (P/N:6600-2-REF) | 1 | PCS |
| WASHER, LOCK, VARCO | 4 | NOS |
| 2 NUM KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ | 16.12 | KGS |
| OILWELL DRILLING RIG SPARES : MANIFLOD ST80 VARCO 30154909-2 | 1 | PCS |
| OILWELL DRILLING RIG SPARES : MANIFLOD LOAD HOLD VARCO 30170587-602 | 1 | PCS |
| OILWELL DRILLING RIG SPARES : V15519 VARCO SDXL 5-1/2" Rotary Slip complete with Inserts(was 3717) "SDXL type hand slips | 1 | PCS |
| OILFIELD EQUIPMENT CLAMP, SAFETY 8 IN TO 9-1/4 IN TYPE MP-R VARCO | 1 | NOS |
| OILFIELD EQUIPMENT KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER DOVETAIL, 5 E | 2 | NOS |
| ASSEMBLY, HOSE, FOR VARCO MODLE ST-80 IRON ROUGHNECK, VARCO P/N 59547P29X040 | 1 | NOS |
| CONVERTER, FREQUENCY/VOLTAGE, VARCO P/N KFU8.UFCEX1 | 1 | NOS |
| ASSEMBLY, MALE HOT STAB, VARCO | 1 | NOS |
| FILTER, SUB-PLATE MOUNTED, 1/2 IN NOMINAL, 3 MICRON, 316SS, VARCO | 1 | NOS |
| O-RING, BOP CONTROL, 1", SAE, FLANGE, VARCO | 2 | NOS |
| MANIFOLD-PIPE, VARCO, 1197362, PIPE HANDLER MACH, ALUM | 1 | NOS |
| KIT-SEAL, VARCO, 30160685SK, RH TORQUE CYLINDER ASSY : USA | 1 | NOS |
| HANDLE, RIGHT & LEFT END SEGMENT, MAKE: VARCO/BJ | 10 | NOS |
| HANDLE, RIGHT, MAKE:VARCO/BJ | 5 | NOS |
TAG：