PTD 500AC (1150HP)
2016-11-06 21:49 Click：times
4-5 Hydraulic Catheads
液压猫头
Qty.: 2 SET
数量：2 套
Model: YM-16-II
型号：YM-16-II
用于上卸接头
FEATURES
特征
- Remote hydraulic control valve locate in Driller’s control cabin.
- 遥控式液压控制阀，安装在司钻空置房内.
- 25 ft per cathead of 27mm high strength wire rope are included.
- 每个液压猫头带长25ft ，直径27mm 高强度钢丝绳.
SPECIFICATIONS
参数
- Rated working pressure: 16MPa（3321psi）
- 额定工作压力:
- Rated flow: 120L/min(4.24ft3/min)
- 额定流量:
- Pull length: 1500mm(59.1ins)
- 拉出长度:
- Max. Pull strength: 160KN(35969lbs)
- 最大拉力:
- Operating Angle Sheave: +/- 20 degree
- 滑轮工作角度:
- Wire Rope Diameter: 27mm
- 钢丝绳直径:
- Weight: 345kg(750lbs)
- 重量:
4-6 Utility Air Winch
Page 26 of 102
气动绞车
Qty. 3 EA. Model: XJFH-5/35
数量： 3 台 型号：XJFH-5/35
Specifications:
参数:
- Air pressure: 0.8 Mpa(116psi)
- 气压:
- Air consumption: 12.7 m3/min(448.5ft3/min)
- 耗气量:
- Rated power: 2.6kW(3.5HP)
- 额定功率:
- Rated load: 50KN(11240lbs)
- 额定载荷:
- Rated speed: 48m/min(157.5ft/min)
- 额定速度:
- Length of wire line: 120m(394ft)
- 钢丝绳长度:
- Dia. of wire line: 20mm(3/4”)
- 钢丝绳直径:
- Overall dimensions: 1335×675×1140mm(52.5x26.6x44.9in)
- 外型尺寸
- Weight: 550kg(1212.5lbs)
- 重量:
Construction:
结构:
- Cast Steel. Load Bearing Components are made from Alloy Cast Steel Material，
adopt belt type brake.
- 铸钢承重轴承组件由合金铸钢制造，采用带式刹车。
4-7 Drilling Line
钻井大绳
6x19S + IWRC, EIPS, 1-1/2”, 1200m (3937ft) wire rope. （API 9A）
Page 27 of 102
4-8 Drilling Line Power Spooler:
卷绳器:
Qty: 1 EA Model: YD38A
数量：1 台 型 号：YD38A
Hydraulic driven drilling line power spooler is for spooling, pulling out and storing drilling
line.
液压卷绳器用于引钻井大绳及储存大绳
Specification:
参数:
- Max. diameter of wheel: 2200mm（86.6in）
- 轮最大直径:
- Max. width of wheel: 1600mm(63”)
- 轮最大宽度:
- Rotational speed: 0.55-17.5r/min
- 旋转速度:
- Max. output torque: 10800N.m(7965lb.ft)
- 最大输出扭矩:
- Max. bearing load: 13900kg(30644lbs)
- 最大载荷:
- Capacity： 38mm(1-1/2") drilling line 1200m(3937ft)
- 能力：
- Rated pressure of hydraulic system: 16Mpa（3321psi）
- 液压系统额定压力:
- Weight: 1700kg(3748lbs)
- 重量:
4-9 ZQ203-100 型钻杆动力钳 ZQ203-100 type Drill Stem Dynamic Tongs
4-10
数量：1 套 QTY: 1 set
ZQ203-l00 钻杆动力钳用于钻井作业中的上卸扣作业，具有安全、省力、上扣扭矩可控、提
高上卸扣速度等作用，特别适用于起下钻频繁，钻井周期长的场合。
Page 28 of 102
4-11 ZQ203-100 type Drill Stem Dynamic Tongs are used for disassembly work in drilling work,
it has the affects of safety, energy saving, it can control the make up torque, improve the
make up and breakout, it suits the conditions that tripping is very frequent, drilling period
is long.
技术参数Parameters:
- 适用管径：3-1/2”(接箍)~8” Applicable pipe diameter: 3-1/2”(box coupling) ~8”
- 液压系统最大工作压力：16MPa Max working pressure of hydraulic syste
- 液压系统额定流量：114L/min Rated flow rate of hydraulic system
- 最大扭矩：100KN.m Max torque
- 高档最大钳头转速：40rpm Max tong head rotary speed in high grade
- 中档最大钳头转速：21~30rpm Max tong head rotary speed in middle grade
- 低档最大钳头转速：2.7rpm Max tong head rotary speed in low grade
气缸移送距离：1500mm moving distance of cylinder
4-12 TQ340-35 套管动力钳 TQ340-35 Casing Dynamic Tongs
数量：1 套 QTY: 1 set
TQ340-35 套管动力钳用于钻井作业中5-1/2”~13-3/8”上卸扣作业，具有安全、省力、上扣
扭矩可控、提高上卸扣速度等作用，特别适用于起下钻频繁，钻井周期长的场合。
TQ340-35 casing dynamic tongs are used for 5-1/2”~13-3/8”disassembly work in drilling
work, it has the affects of safety, energy saving, it can control the make up torque, improve the
make up and breakout, it suits the conditions that tripping is very frequent, drilling period is
long.
技术参数Parameters:
- 适用管径：5-1/2”~13-3/8” Applicable pipe diameter
- 液压系统最大工作压力：16MPa Max working pressure of hydraulic system
- 液压系统额定流量：114L/min Rated flow rate of hydraulic system
- 高档最大扭矩：2.5~3KN.m Max torque in high grade
- 中档最大扭矩：6.0~7.5 KN.m Max torque in middle grade
- 低档最大扭矩：35 KN.m Max torque in low grade
- 高档最大钳头转速：60~86rpm Max tong head rotary speed in high grade
- 中档最大钳头转速：21~30rpm Max tong head rotary speed in middle grade
Page 29 of 102
- 低档最大钳头转速：2.6~5.3rpm Max tong head rotary speed in low grade
4-13 吊钳Tongs
B 型钳用于2-1/2"~13-3/8" B type tongs used for
2-1/2"~13-3/8"
Ea. 2
B 型钳用于13-3/8"~35 “B type tongs used for
13-3/8"~35
Ea. 2
Page 30 of 102
SECTION 5 TRAVELING AND ROTARY EQUIPMENT
旋吊设备
5-1 Traveling Block
游车
Qty. : EA. Model: YC-450
数量：1 台 型 号： YC-450
Features:
特征
- Conforms to API 8A specification.
- 符合 API 8A.
- Traveling Block grooved for Ф38mm (1-1/2”) line. Complete with six (6) 60” sheaves
and rated for 500 tons.
- 游车适合使用Ф38mm (1-1/2”) 钢丝绳，配有6 个60”滑轮，额定载荷500 tons.
- Consists of upper beam with 50mt hang off padeye, sheaves assembly, left and right
side plates, and lower clevis connection.
- 由顶梁（带50mt 耳板）、滑轮组、侧板和U 形连接钩组成.
- Specifications:
- 参数
- Max. Load: (6 x 7 line): 4500KN(101160lbs)
- 最大载荷:
- No. of sheaves: 6
- 滑轮数量:
- Dia. of sheaves: Ф1524mm (60”)
- 滑轮直径:
- Dia. of wireline: Ф38 (1-1/2”)mm
- 钢丝绳直径:
5-2 Hook
大钩
Qty.: 1 EA. Model: DG-450
数量：1 台 型 号： DG-450
Features:
特征:
Page 31 of 102
- Conforms to API 8A specification.
- 符合 API 8A.
- Hydraulic buffer action.
- 液压缓冲作用.
- Specifications:
- 参数:
- Max. capacity: 4500kN(101160lbs)
- 最大负荷:
- Spring travel length: 200mm(7.87in)
- 弹簧行程:
- Main hook open size: 220mm(8.66in)
- 大钩开口尺寸:
- Weight: 3520kg(7760lbs)
- 重量:
5-3 Swivel
水龙头
Qty.: 1 EA Model: SL450-5
数量：1 台 型 号： SL450-5
Features:
特征：
- Conforms to API 8A specification.
- 符合 API 8A
- Consists of standard bail, double pin alloy steel sub with 6-5/8” API regular LH pin
down, washpipe packing assembly, and 4 API LP THD Rotary hose connection
- 启动旋扣器包括：气动马达、齿轮和单向气控摩擦离合器
- Complete with weco style hammer union access fitting for 2” wireline entry on top of
gooseneck
- 配 weco 形式的锤击由壬，适合2” 钢丝绳穿过顶部的鹅颈管
Specifications:
规格
- Max. Static capacity: 4500Kn(1011600lbs)
Page 32 of 102
- 最大静载荷:
- Max. Speed: 300r/min
- 最大转速:
- Max. Working pressure: 35MPa (5000psi)
- 最大工作压力:
- ID of shaft bore hole: 75mm (3’)
- 内孔直径:
- ID of Gooseneck and wash pipe 75mm (3’)
- 鹅颈管和冲管内径
- Connections
- 连接
- For shaft: 6-5/8”REG-LH
- 轴:
- For Kelly: 6-5/8”REG-LH
- 方钻杆:
- For gooseneck: 4” API LP THD
- 鹅颈管:
- Overall dimension:
- 外型尺寸: 3037×1090×1085mm(119.6x42.9x42.7)
- Weight (Including kelly spinner): 3060kg(6746lbs)
- 重量(包括方钻杆旋扣器):
5-4 Rotary Table
转盘
Qty.: 1 EA. Model: ZP-375
数量：1 台 型 号： ZP-375
Features:
特征：
- Conforms to API 7K specification.
- 符合API 7K 技术要求.
- Independent driven by one 800kW DC motor
- 由一个800kW 直流电机独立驱动
Page 33 of 102
- Rectangular base and guard
- 长方形底座和防护装置
- Specifications:
- 规格：
- Max. Opening: 952.5mm (37-1/2”)
- 最大开口直径:
- Max. Static load: 5850 kN（1315100lbs）
- 最大静负荷:
- Max. Output torque: 32362N.m(23868lb.ft)
- 最大输出扭矩:
- Max. Rotary speed: 300rpm
- 最大转速:
- Gear ratio: 3.56:1
- 传动比:
- Overall dimension: 2468×1810×718mm(97.2x71.3x28.3in)
- 外型尺寸:
- Weight (exclude main bushing): 7550kg(16645lbs)
- 重量 (不包括主补心):
5-5 Independent Rotary Table Drive
转盘动力驱动装置
Qty. :1 EA.
数量：1 台
The rotary table is coupled with independent 800kW, DC motor drive transmission and
independent lubricating system.
转盘与由800kW 直流电机独立驱动的变速器进行耦合，具有独立的润滑系统.
- Transmission and accessories are mounted on a steel frame substructure.
- 变速器和附件安装在铁的框架结构当中.
- Rotary table has inertia brakes.
- 转盘有惯性刹车
- Reversing achieved by reversal of the AC drive motor complete.
- 转盘倒转由交流电机倒转实现.
Page 34 of 102
- 15HP, 3P, 60HZ, 480V explosion proof blower motor with all accessories.
- 15HP, 3P, 60HZ, 480V 防爆鼓风电动机（带附件）
Specifications:
参数:
- Rated input power: 800kW（1073HP）
- 额定输入功率:
- Transmission: Gear drive
- 传动方式： 齿轮驱动
- Gear ratio: 1：1.09
- 传动比: 1：1.87
- Lubrication oil filling volume: 110L
- 润滑油填充容积:
5-6 Drilling Motor-Rotary Table
钻井电机-转盘
Qty. 1 EA. Model: YZ08A02
数量：1 台 型号：YZ08A02
5-7 Kelly Bushing
方钻杆补心
- Roller Kelly Bushing for 5-1/4” Hex. Kelly
- 滚子方钻杆补心，用于 5-1/4” 六方钻杆
- Roller Kelly Bushing for 4-1/4” Hex. Kelly
- 滚子方钻杆补心，用于4-1/4” 六方钻杆
5-8 Master Bushing
主补心
- Master bushing 1ea
- 主补心装置
- Insert Bowl No.1 for 13-3/8” and 11-3/4” casing 1ea
- 嵌入式补心 No.1 用于13-3/8” 和11-3/4”套管
- Insert Bowl No.2 for 10-3/4” and 9-5/8” casing 1ea
- 嵌入式补心 No.2 用于10-3/4” 和9-5/8” 套管
- Insert Bowl No.3 for 8-5/8” and 2-3/8” casing 1ea
Page 35 of 102
- 嵌入式补心 No.3 用于8-5/8” 和2-3/8” 套管
- 4 leg Lifting slings for master bushing 1ea
- 4腿提升吊索用于主补心
- 2 leg Lifting slings for split casing bushing 1ea
- 2腿提升吊索用开口套管补心
- Casing bushing for 20” and 18-5/8” casing 1ea
- 套管补心，用于20” 和18-5/8” 套管
- Casing bushing for 30” casing 1ea
- 套管补心，用于30” 套管
- Bit breaker adapter plate 1ea
- 钻头装卸盘
5-9 Top Drive System 顶驱
数量：1 台 Quantity: 1 set
型号：PTD 500AC (1150HP) Model: PTD 500AC (1150HP)
Equipped with the most compact 1150 HP AC motor available.
Integrated swivel.
Multi-functional pipe handler (remote controlled).
60,000 lbf ft make-up and break-out capacity on torque
wrench.
Onboard hydraulic power unit.
Bidirectional link tilt system.
Fully adjustable tool face orientation system.
Variable frequency drive mounted in an air conditioned.
Housing together with PLC and auxiliary electrical controls.
Modularized assembly of main components
(simplifies maintenance & overhaul).
Specification:
Drilling horsepower 1150HP
Lifting capacity 500 Tons
Continuous torque 59600Nm (43900 lbf ft)
Torque at Max.speed 40100Nm (29500 lbf ft)
Max.speed 208 rpm
Speed at max torque 140 rpm
Power input max 970kw (1300hp) continuous
Page 36 of 102
Weight incl. guide dolly 14000 kg (30800 lb)
Length 5425mm (17.8ft)
TAG：