Rope stop P/N- DSQ-0.100
2017-03-20 22:57 Click：times
| LOT-1 | |||||
| Draw- Works Model- JC123-TC: | |||||
| 01 | Rope stop P/N- DSQ-0.100 | nos | 04 | ||
| 02 | Pressure gauge 0-0.6Mpa P/N- Y-60 | nos | 01 | ||
| 03 | Secondary Filter P/N- ELY-00 | nos | 02 | ||
| 04 | Primary filter P/N- CLY-00 | nos | 02 | ||
| 05 | Brake pad, Code-PS80 | nos | 20 | ||
| Main HPU | |||||
| 01 | Oil return filter element P/N- FBX-400×10 | nos | 03 | ||
| 02 | Disc brake oil return filter element P/N- FAX-63×10 | nos | 03 | ||
| 03 | Oil suction filter element P/N- TFX-400×100 | nos | 03 | ||
| 04 | Disc brake oil suction filter element P/N- TFX-63×100 | nos | 03 | ||
| 05 | Air filter P/N- QUQ3-10×40 | nos | 02 | ||
| 06 | Hose, ؾ”,L=52”, W.P.-21.5MPa, both male conn. | nos | 04 | ||
| 07 | Hose, ؾ”,L=61”, W.P.-21.5MPa, both male conn. | nos | 02 | ||
| 08 | Hose, ؾ”,L=65”, W.P.-21.5MPa, both male conn. | nos | 02 | ||
| 09 | Hose, ؾ”,L=20’, W.P.-25MPa, both male conn. | nos | 08 | ||
| 10 | Hose, ؾ”,L=15’, W.P.-25MPa, both male conn. | nos | 02 | ||
| 11 | Hose, ؼ”,L=55’, W.P.-21.5MPa, both male conn. | nos | 01 | ||
| 12 | Hose, ؾ”,L=65’, W.P.-21.5MPa, both male conn. | nos | 02 | ||
| 13 | Hose, ؽ”,L=24’, W.P.-27.5MPa, both male conn. | nos | 03 | ||
| 14 | Hose, ؾ”,L=20’, W.P.-25MPa, male-female(swivel). | nos | 02 | ||
| 15 | Hose, ؾ”,L=16’, W.P.-25MPa, both male conn. | nos | 04 | ||
| 16 | Hose, ؼ”,L=16’, W.P.-21.5MPa, both male conn. | nos | 01 | ||
| 17 | Hose, Ø1”, L=75’”, W.P.-21.5MPa, both male conn. | nos | 01 | ||
| 18 | Hose, ؼ”,L=25’, W.P.-21.5MPa, both male conn. | nos | 01 | ||
| 19 | Hose, ؾ”,L=20’, W.P.-25MPa, male-female(swivel). | nos | 02 | ||
| 20 | Hose, ؼ”,L=20’, W.P.-25MPa, both male conn. | nos | 03 | ||
| 21 | Hose, ؾ”,L=75’, W.P.-21.5MPa, both male conn. | nos | 01 | ||
| 22 | Hose, Ø1”,L=16’, W.P.-21.5MPa, both male conn. | nos | 02 | ||
| 23 | Disc Brake Hydraulic Pump with motor/Brake Pump Set: HYD. SYSTEM HTY05 00 including motor bell jar coupling and oil pump. This is for Draw- Works Model- JC123-TC (50 Hz) | nos | 01 | ||
| 24 | Hydraulic Pump and Motor(Coupled) 160YCY-Y315S-6, 75kw, 400V, 3 phase, 50Hz. | nos | 01 | ||
| Air supply system | |||||
| 01. | Air cleaner P/N- C-013 | nos | 02 | ||
| 02. | Air cleaner P/N- T-013 | nos | 02 | ||
| 03. | Ball valve NPT 2” | nos | 02 | ||
| 04. | Ball valve NPT ½” | nos | 02 | ||
| 05. | Air Hose NPT 2” 511 | nos | 02 | ||
| 06. | Check valve P/N- Aa-L40 | nos | 02 | ||
| 07. | Hose, ؼ”,L=80’, W.P.-28MPa, both side female(swivel) | nos | 01 | ||
| 08. | Hose, ؼ”,L=27’, W.P.-28MPa, both side female(swivel) | nos | 01 | ||
| 09. | Hose, ؽ”,L=35’, W.P.-28MPa, both side male | nos | 01 | ||
| 10. | Hose, ؽ”,L=16’, W.P.-28MPa, male- female(swivel) | nos | 01 | ||
| Air Compressor, Model-Quency QDT-45 KW HT | |||||
| 01 | Element Air filter P/N-23458-4 | nos | 08 | ||
| 02 | Element Fluid filter P/N-128381-050 | nos | 08 | ||
| 03 | AO separator P/N-124487-018 | nos | 08 | ||
| 04 | Coupling Drive P/NG35099119-001 | nos | 04 | ||
| 05 | Compressor Oil, 18.9 L Container P/N-144046-055 | Container | 08 | ||
| 06. | Inlet valve Group P/N126650-005 | nos | 06 | ||
| LOT-2 | |||||
| Mud Pump Model- NOV 12-P-160 | |||||
| 01 | Liner 6½” P/N-05466650 | nos | 12 | ||
| 02 | Liner 5 ½ P/N-05466550 | nos | 18 | ||
| 03 | Liner 5” P/N-05466500 | nos | 18 | ||
| 04 | Piston 6½” P/N-1502062 | nos | 12 | ||
| 05 | Piston 5½” P/N-1502058 | nos | 18 | ||
| 06 | Piston 5” P/N-1502056 | nos | 18 | ||
| 07 | Valve ,complete assy urethane insert P/N-1560985 | nos | 30 | ||
| 08 | Valve seat, full open P/N-1561440 | nos | 30 | ||
| 09 | Valve spring P/N-1560702 | nos | 12 | ||
| 10 | Valve cover P/N-1540138 | nos | 02 | ||
| 11 | Liner spray system P/N-1292120 | nos | 06 | ||
| 12 | Hose 1”×40” P/N-6100036 | nos | 02 | ||
| 13 | Hose 1½”×46” P/N-6100037 | nos | 02 | ||
| 14 | Pressure gauge 0-6000 psi P/N- YN150B | nos | 02 | ||
| 15 | Combined narrow V-Belt P/N-25(J)5-8000 | nos | 04 | ||
| 16 | Valve insert, urethane P/N-1560557 | nos | 12 | ||
| 17 | Piston replacement rubber 6½” P/N-015180300 | nos | 18 | ||
| 18 | Piston replacement rubber 5½” P/N-015180227 | nos | 18 | ||
| 19 | Piston replacement rubber 5” P/N-015180185 | nos | 18 | ||
| 20 | Valve insert guide P/N-1292141 | nos | 18 | ||
| 21 | Holder, valve insert guide P/N-1292140 | nos | 18 | ||
| 22 | Valve cove gasket P/N- G-787U | nos | 18 | ||
| CAT Generator, Model -3512B | |||||
| 01 | Primary air filter P/N-8N-6309 | nos | 08 | ||
| 02 | Secondary air filter P/N-8N-2556 | nos | 08 | ||
| 03 | Fuel filter P/N-1R-0756 | nos | 40 | ||
| 04 | Oil filter P/N-1R-0726 | nos | 36 | ||
| 05 | Kit seal and vane P/N-5N-8390 | nos | 04 | ||
| CAT Generator, Model- C15 | |||||
| 01 | Fuel filter P/N-1R-0749 | nos | 04 | ||
| 02 | Fuel –water seperator P/N-1R-0781 | nos | 04 | ||
| 03 | Oil filter P/N-1R-0716 | nos | 04 | ||
| 04 | Air cleaner filter element P/N-9Y-3879 | nos | 04 | ||
| 05 | Primary air filer element P/N-151-7737 | nos | 04 | ||
| 06 | Secondary air filter element P/N-189-0202 | nos | 04 | ||
| 07 | V-Belt P/N-9L-6641 | nos | 02 | ||
| Spares for Top Drive : Make & model- Canrig 1250AC | |||||
| 1. | Wash Pipe, 3.00 inch bore, 5000psi, P/N-722-10-0 | nos | 05 | ||
| 2. | Wash Pipe Packing STD 3.00 inch, P/N-R01-1002-010-REVN/A ( 1 set should contain all the required packing). | set | 05 | ||
| 3. |
LWCV Assy. NC50box X NC 50 Pin, 22LG P/N- AY11201 |
nos | 06 | ||
| 4. |
Lug Elevator link, 3.70 bore, P/N- 594-02-4-E MHE 18932-155 |
nos | 04 | ||
| LOT-3: Solid control equipments | |||||
| Shale shakers- Derrick Model:FLC 2000-3 | |||||
| 01 | Ramp lock assy. P/N-9744-00 | nos | 24 | ||
| 02 | Side support P/N- 6417-01 | nos | 24 | ||
| 03 | Cross support P/N-6417=06 | nos | 24 | ||
| 04 | Channel protector P/N-3660-05-30 | nos | 150 | ||
| 05 | F Loat mount P/N-1129-00 | nos | 40 | ||
| 06 | Wrench P/N-10045-01-004 | nos | 02 | ||
| 07 | Spinner wrench P/N-5925-01 | nos | 02 | ||
| Desander- Derrick DSV-10-3 | |||||
| 01 | 5” Victaulic cap P/N- VLC-5-60 | nos | 02 | ||
| 02 | Pressure gauge(0-100 psi) P/N- PP1429 | nos | 01 | ||
| 03 | 8” Victaulic cap P/N- VLC-8-60 | nos | 02 | ||
| 04 | 8” Victaulic coupling P/N- VLC-8-75 | nos | 01 | ||
| 05 | 5” Victaulic coupling P/N- VLC-5-75 | nos | 01 | ||
| 06 | Lower band P/N-6066-55 | nos | 02 | ||
| 07 | Upper band P/N-6066-53 | nos | 02 | ||
| Desilter Model: Derrick S-416-S & Mud cleaner Derrick Model:FLO Line -2000 | |||||
| 01 | 8” Victaulic coupling P/N- VIC-8-75 | nos | 04 | ||
| 02 | 2” Victaulic zero flex coupling P/N- VIC-2-07 | nos | 04 | ||
| 03 | 2” Victaulic cap P/N- VIC-2-60 | nos | 04 | ||
| 04 | 1800 Victaulic urethane elbow P/N- G0002077 | nos | 06 | ||
| 05 | 2” Victaulic snap coupling P/N- VIC-2078 | nos | 04 | ||
| 06 | Pressure gauge(0-100 psi) P/N- PP1429 | nos | 03 | ||
| 07 | 3” Victaulic cap P/N - VIC-3-60 | nos | 04 | ||
| 08 | 3” Victaulic coupling P/N- VIC-3-75 | nos | 04 | ||
| Centrifuge Derrick Model:DE1000VFD | |||||
| 01 | Drive belt P/N-5G3V-1000 | nos | 02 | ||
| 02 | Grease, High speed P/N- C000-RA-110-00 | nos | 04 | ||
| 03 | Grease Main bearing P/N- Che-SRI-2 | nos | 04 | ||
| 04 | Gear box Oil P/N- SHELL-OMALA-A320G | nos | 01 | ||
| 05 | Door latch P/N- G0008005 | nos | 16 | ||
| 06 | Air filter P/N- G00013565 | nos | 02 | ||
| Degasser. Derrick Model:FLO1200 | |||||
| 01 | Hose, 1” NPT with swivei ×85” long P/N- HYT-E716×8500 | nos | 01 | ||
| 02 | Hy. Hose 1”×13” P/N- HYT-E716×1300 | nos | 01 | ||
| 03 | Drive belt P/N- PP1137 | nos | 01 | ||
| 04 | Air filter element P/N- WLK-FRP-95-209 | nos | 01 | ||
| 05 | Three way valve P/N- PP1491 | nos | 01 | ||
| High Pressure Mud Circulating system | |||||
| 01 | 4” Flanged metal seal mud valve API 4 1/16”-35 | nos | 06 | ||
| 02 | 2” Flanged metal seal mud valve2” API 2 1/16”-35 | nos | 04 | ||
| 03 | 4” 1003 Union seal ring j125×j10 | nos | 12 | ||
| 04 | 2” 1502 Union seal ring | nos | 08 | ||
| 05 | Seal ring R×39 | nos | 12 | ||
| 06 | O ring R×24 | nos | 20 | ||
| 07 | Pressure gauge P/N- YK-200Y | nos | 01 | ||
| LOT -4 | |||||
| Solid Control circulating system | |||||
| 01 | Butterfly valve DN300 | nos | 6 | ||
| 02 | Butterfly valve DN250 | nos | 10 | ||
| 03 | Butterfly valve DN200 | nos | 10 | ||
| 04 | Butterfly valve DN150 | nos | 08 | ||
| 05 | Butterfly valve DN80 | nos | 10 | ||
| 06 | Butterfly valve DN50 | nos | 10 | ||
| 07 | Centrifugal pump SB 6”×8 FJ-12½” r | nos | 04 | ||
| 08 | Centrifugal pump SB 3”×4”FJC-9½” | nos | 02 | ||
| 09 | Centrifugal pump S2”×3”FJC-10” | nos | 02 | ||
| 10 | Mud hose DN80, L-3500 with union fig100,3” | nos | 08 | ||
| 11 | Mud hose DN80, L-4500 with union fig100. 3” | nos | 08 | ||
| 12 | Pin and sheath loop (forSB 6×8) P/N- SB68J0015S | nos | 100 | ||
| 13 | Pump jointer P/N- SB68J0003S | nos | 03 | ||
| 16 | Motor jointer P/N- SB68J0004S | nos | 03 | ||
| 17 | Key P/N- SB68J0005S | nos | 03 | ||
| 19 | Key P/N- SB68J0006S | nos | 03 | ||
| 20 | Union sub seal ring 12” | nos | 10 | ||
| 21 | Union sub seal ring 8” | nos | 10 | ||
| 21 | Union sub seal ring 6” | nos | 10 | ||
| 22 | Union fig100 3” | nos | 06 | ||
| 23 | Hopper, Model-ZHP150 | nos | 01 | ||
| 01 | Butterfly valve DN300 | nos | 6 | ||
| 02 | Butterfly valve DN250 | nos | 10 | ||
| Spares for Air Tank | |||||
| 01 | Pressure Relief valve (PRV)/Safety valve with 1.5 inch NPT male connection. The valve should be set so that it opens at 130 psi and closes at 90-110 psi. The test report and quality certificate should be provided with the valve. | nos | 05 | 20 | |
TAG：