Bomco Rotary table ZP-175,ZP-205,ZP-275,ZP-375,ZP-375Z,ZP-49
Rotary Table is an important component of rig123.net' target='_blank'>drilling rig. During drilling, the rotary table turns the Kelly; the Kelly turns the string and bit to drill the hole. The rotary table is designed to conform to the Standard SY/T 5531 “Rotary Table for Drilling Rig” and API 7K Spec.
Functions and Features
During drilling, the rotary table turns the Kelly and the string hanging under the swivel to drill the hole. On trips and running casing, the string is latched to the top rotary table, which can receive the maximum load permitted in the drilling rig and the long service life of the table bearings should be guaranteed in load condition. The rotary table can transmit the enough torque and horsepower through the bevel gear and pinion.
Rotary table part name
| 1 | Left pawl |
| 2 | Right pawl |
| 3 | Control rod pin |
| 4 | Pawl pin |
| 5 | Screw plug 1/8″ |
| 6 | Control plug |
| 7 | nameplate |
| 8 | Oil pointer |
| 9 | Screw plug 1 1/2″ |
| 10 | Forge welding substructure |
| 11 | Wall scraper |
| 12 | Upper cover |
| 13 | Big rig gear |
| 14 | Turntable |
| 15 | Slipper |
| 16 | pin |
| 17 | 5″master bushing |
| 18 | Break out block |
| 19 | Washer |
| 20 | Input shaft assembly |
| 21 | screw plug 1″ |
| 22 | Lower seal set |
| 23 | O seal ring |
| 24 | Bolt M24×70 |
| 25 | Washer |
| 26 | Washer |
| 27 | Lower seal set |
| 28 | stopper |
| 29 | O seal ring |
| 30 | Double bank chain wheel P=50.8 Z=19 |
| 31 | Double bank chain wheel P=50.8 Z=21 |
| 32 | Baffle |
| 33 | Flange |
| 34 | Main bushing lifting dog |
| 35 | Oil cup M10×1 |
| 36 | Allen screw M24×75 |
| 37 | Rivet 3×10 |
| 38 | Bearing 800×1060×155 |
| 39 | Cotter pin 5×35 |
| 40 | Bearing 800×950×120 |
| 41 | Spring washer 24 |
| 42 | Bolt M16×40 |
| 43 | Spring bolt 16 |
| 44 | Small bevel gear Me=18 Z=21 |
| 45 | Left Bearing cover |
| 46 | O-seal ring 420×8.6 |
| 47 | spacer |
| 48 | shaft |
| 49 | Washer 426×520×0.5 |
| 50 | Bearing sleeve |
| 51 | Washer 322×400×1 |
| 52 | Check ring 150 |
| 53 | Right Bearing cover |
| 54 | Shaft sleeve nut |
| 55 | Key |
| 56 | screw plug NPT 1 |
| 57 | Oil seal 180×220×18 |
| 58 | Bearing 32630 |
| 59 | Bearing 3630 |
| 60 | Bearing M20×60 |
| 61 | Spring washer 20 |
| 62 | Bolt M16×35 |
| 63 | Iron wire φ1 |
Application: BOMCO Drilling rig, workover rig
Model:ZJ50/3150D,ZJ70/4500D,ZJ90/6750D,ZJ15/900DB,ZJ30/1700DB,ZJ40/2250DB,ZJ50/3150DB,ZJ70/4500DB,ZJ90/6750DB,ZJ120/9000DB,ZJ10B,ZJ15D,ZJ30B,ZJ30DJ,ZJ40L/40J,ZJ50L/50J,ZJ70L,ZJ30LDB,ZJ40LDB,ZJ50LDB,ZJ70LDB/LD,ZJ90/6750DB-S, ZJ80/5850D,ZJ80/5850DB,ZJ50DBT,ZJ70DBT,ZJ10DBT,ZJ30DBT,ZJ40DBT,GW-M1000,ZJ40/2250DT,ZJ50/3150DBT,
ZJ50/3150DT,ZJ70/4500DBT,ZJ10/1100Z,ZJ15/1350Z,ZJ20/1600Z,ZJ30/1800CZ,ZJ40/2250CZ,XJ900Z,XJ1100Z,XJ1350Z,XJ1600Z,XJ1800CZ,XJ2250CZ
TAG£º- ÉÏһƪ£º1120T10¡¢1030T10¡¢1040T10¡¢1050T10¡¢1060T10
- ÏÂһƪ£ºSPM Hammer Union