Supply parts for 3NB1000C Pinion shaft & crosshead assy
2018-06-14 10:48 Click£ºtimes
| Slush pump | 107.14.00 |
| Pinion shaft & | 107.14.10.00 |
| crosshead assy | |
| Crosshead center & LH | 107.14.20.19 |
| Crosshead Left | 107.14.20.19 |
| Screw | 107.06.20.38 M20x60 |
| Wire | Ø1.6 L=15000 |
| Pin retainer | 107. W. 20.17-2 |
| Bearing | CG154734HU (Ø170*260*92) |
| Oil conductor | 107.15.20.20 (Ø20*2 L=30) |
| Bush | 107.14.10.01 |
| Bearing cover | 107.14.10.02 |
| Oil seal | D7-1-67 (220x260x18) |
| Bearing | CG32840HU 200x-320x88.9 |
| Bearing cage | 107.14.10.04 |
| Gasket | 107.14.10.05 (6 1) |
| Screw | GB32.1-88 (M12x25) |
| Wire | Ø1.2 L=600 |
| Oil box | 107.14.11.00 |
| Shaft | 107.14.10.06 |
| rig123.net' target='_blank'>Righ Hand gear | 107.14.10.07 |
| key | 107.14.10.08 (45x240) |
| Left-hand gear | 107. 14.10.09 |
| Gasket | 107.14.10.03 |
| Gasket | 107.14.10.10 |
| Gasket | — |
| Gasket | |
| Seal | D4-4-66 (330x5.7) |
| Bolt | GB5783-86 (M20x50) |
| Washer | GB93-87£¨20) |
| Key | 107.04.10.10 (44.45x360) |
| Shim for pin retainer | 107.14.20.21 |
| Shim for pin retainer | 107.14.20.22 |
| Shim for pin retainer | 107.14.20.23 |
| Shim for pin retainer | 107.14.20.24 |
| Crosshead pin | 107.14.20.11 |
| Crosshead right | |
| Crosshead center & R.H | |
| Outer retainer | 107.04.20.24 (170) |
| Inside retainer | 107.04.20.18 (260) |
TAG£º