product description:

l YTAP-A1 explosion-proof wireless bridge is designed to meet the extremely special explosion hazard environment below IIB gas group and flammable dust;

l Its manufacture meets the requirements of the GB3836-2010 standard. The use of scientific flameproof structure to achieve explosion-proof explosion-proof requirements;

l Based on the 802.11a/g protocol, wireless devices use efficient security measures such as data encryption and MAC address restriction to ensure absolute security of all user data, and can also create redundant backup policies. Any single point of failure will not affect the entire wireless network. Normal operation;

l It can realize point-to-point or point-to-multipoint network connection at a distance of 3-10 kilometers, and the data transmission speed is up to 300Mbps, which effectively solves the problem of network connectivity in the interval.

l Mobility, users can move freely and access information in real time from anywhere;

l Centralized management, management of all wireless access terminals through an interactive graphical interface, and on-site maintenance of cables, saving network maintenance expenses.

 

Features:

l Can be used in explosive atmospheres in Zone II;

l The only explosion-proof wireless AP/CPE products in the domestic market;

l Built-in foreign imported bridge chip, stable and reliable operation;

l High-performance outdoor multi-point network in a certain explosion-hazardous location, providing wireless settings, bridging and routing configurations.

l Panel antenna and bipolar function for point-to-multipoint (PtMP) applications that require streamlined, high-performance CPE equipment;

l A variety of applications, can be used in wireless network erection of explosion-proof places, explosion-proof wireless video surveillance system, especially suitable for occasions such as oil rig123.net' target='_blank'>drilling and mining that need to be relocated frequently.

 

Technical Parameters:

Explosion-proof parameter

Explosion-proof certificate number CNEx16.1812

Explosion-proof mark Exd IIB T6 Gb

Protection level IP65

Electrical parameter

Working voltage POE DC24V is suitable for a variety of in-vehicle devices

Working current ≤500mA

Wireless module transmission power ≤500mW

Frequency 5GHz

Bandwidth 300M

Power 13dBi

Output power 23dBm

Processor Specifications Atheros MIPS 24KC, 400 MHz

Memory 32 MB SDRAM, 8 MB flash

Network interface 1X10/100/1000BASE-TX (CAT5, RJ45) Ethernet port

Wireless License FCC Part 15.247, IC RS210, CE

Polarization

Maximum power consumption 5.5W

Mechanical parameters

Material Carbon steel spray (standard) other 304/316 material please contact

Weight 8kg

Mounting method Pole holding / wall mounting

Cable entry device Explosion-proof plug-in device *2 (power supply and network cable)

Environmental indicator

Atmospheric pressure 80～106KPa

Ambient temperature -25°C~+60°C (normal temperature) -45°C~+60°C (low temperature)

Relative humidity ≤95%RH (+25°C)

 

Order remarks:

1. Working environment: □ normal temperature □ low temperature

2. Field voltage: □AC220V □DC24V □DC12V

3, installation method: □ hold □ wall mounted